Products


 
Pinewood Derby Precision Wheel Balancer*

Don't pass up this NEW speed tool for Balancing the wheels of your Pinewood Derby Cars. THE new BSA Wheels are NOT Balanced. For maximum performance and speed, your wheels need to be precision balanced. This specially designed Patented* ( RLNMACHINING)  tool can do it. It is very sensitive can detect an unbalanced wheel by identifying the heavy side of the wheel so excess weight can be removed or added. The base of the Pinewood Derby Precision Wheel Balancer * is aluminum and will not rust. Balancing with this tool is a very simple process and is a must for extra speed needed to win your next race. You spend a lot of time and effort making the Pinewood Derby Race car. Now just finish the job with a Balanced set of wheels. You will feel better when you are setting your Fast car with Balanced wheels down on to the track knowing that you went the extra mile before the Race. Thank You  * Patented (see instructions here) http://www.rlnmachining.com/instructions.htm

$23.95

 


 
Weight molded and Machined to fit hole in rear of car

This molded lead machined  weight fits into the rear of my cars or where ever you need to add weight..

$7.00

 


 
Special Machined Pinewood Derby BSA Wheel and Axle combo price

100%  BSA Wheels and BSA  Axles machined and Polished.

BSA Wheels are Machined on a Lathe so that the tread surface runs true to the wheel bore. Wheel Bore is prepped  with my  special graphite dry lube which is is inbedded into wheel bore using my  break in procedures so  When it comes to Derby race time , your wheels will already be prepped and Race Ready. BSA wheels are  Machined to have a  smooth flat tread surface and to remove  Mold marks while retaining the beaded edges required by most Pack rules. Machined wheels are lighter and make your car faster with quicker starts and faster track times   Wheel retains all of the lettering and numbering inside and out.    The Axles are straightened,machined and highly  Polished  to reduce surface friction.   All of These modification decreases friction and equal faster run times for your Pinewood Derby Race  car.

$26.00

 


 
100 percent BSA Ready to race Pinewood Derby Car

A Proven durable winning Wedge Design. Wedge design has the BSA slots, 5 axle holes. Right front has one of the two holes raised in case you want to run with one wheel up for less resistance. Maximum wheel Base for a nice fast stable Race car. The weight hole is machined into the rear of the car to get the best performance.  Final weight will be 4.9 to 5 oz.

$50.00

 


 
100 percent BSA ready to paint Pinewood Derby Car

Save your self the time  and effort  if you do not have the time or resources to build a Pinewood Derby car. This is a winning Wedge design for those people who want to add their own personal touch by painting .  Block has several machined holes and 2 slots so that you have different options depending on the way you want to race or Pack rules .. 4 wheels down or one raised wheel in front for a 3 wheeler with one wheel raised. (2 slots, 5 axle holes, and weight hole in the  rear) supplied weight will bring the car weight  to 4.9 - 5 oz. 

$40.00

 


 
Pre-drilled BSA blocks for Pinewood Derby Cars

All blocks are original BSA blocks with slots for standard wheelbase. In addition, there are holes for an extended wheelbase and a slightly raised hole in the right front so that only three wheels touch the track. (I have found this to be a successful design) This allows you to utilize any version that your required to based on your local rules. All blocks have a hole drilled into the rear of the block that allows you to add my machined lead weight. (2 slots, 5 axle holes, and weight hole in rear)

$10.00

 


 
Pinewood Derby BSA wheel axles (set of 4)

100% BSA  axles are straightened, machined and highly  polished so that your Pinewood Derby Race car is faster. 

$16.00

 


 
Precision BSA wheels (set of 4)

These wheels are machined and graphite-coated. All points of resistance removed for better speed .  BSA Wheels are Machined on a Lathe so that the tread surface runs true to the wheel bore. Wheel Bore is prepped with my special graphite dry lube which is is inbedded into wheel bore using my break in procedures so When it comes to Derby race time , your wheels will already be prepped and Race Ready. BSA wheels are Machined to have a smooth flat tread surface and to remove Mold marks while retaining the beaded edges required by most Pack rules. Machined wheels are lighter and make your car faster with quicker starts and faster track times.  Wheel retains all of the lettering and numbering inside and out. All of these modifications equal a fast set of BSA wheels for your car.
 

$18.00