 | |
Lead Weight Machined to fit hole in rear of car
Parents -This weight fits into the rear of my cars or where ever you need to add weight. Just seal hole after weight is added so that the children dont have to worry about the lead weight.$6.00
|
| |
Special Machined Wheel and Grooved Axle combo price
Machined BSA wheels and BSA Axles with grooves machined into them. polished.$19.95
|
 | |
Special Machined BSA Wheel and Axle combo price (click picture to enlarge)
*Patented BSA Wheels and Axles machined and Polished. Hubs are radiused. please ask questions if you need something special or different than advertised.$19.95
|
 | |
Pre-drilled BSA Wedge block for Pinewood Derby Cars (click picture to enlarge)
A Proven durable winning Wedge Design. Wedge design has the BSA slots, 5 axle holes. Right front has one of the two holes raised in case you want to run with one wheel up for less resistance. Maximum wheel Base for a nice fast stable Race car. The weight hole is machined into the rear of the car to get the best performance .$23.00
|
 | |
100 percent BSA Ready to race Pinewood Derby Car (click picture to enlarge)
A Proven durable winning Wedge Design. Wedge design has the BSA slots, 5 axle holes. Right front has one of the two holes raised in case you want to run with one wheel up for less resistance. Maximum wheel Base for a nice fast stable Race car. The weight hole is machined into the rear of the car to get the best performance.
Machined hubs to body clearance for best speed and less resistance. If you can not use the radiused hubs. I will supply you with non radiused hubs. Lead weight is inside of the car and sealed up. Final weight will be 4.9 to 5 oz. $50.00
|
 | |
100 percent BSA ready to paint Pinewood Derby Car (click picture to enlarge)
A winning Wedge design
For those people who want to add their own personal touch (2 slots, 5 axle holes, and weight hole in rear)$40.00
|
 | |
Pre-drilled BSA blocks for Pinewood Derby Cars (click picture to enlarge)
All blocks are original BSA blocks with slots for standard wheelbase. In addition, there are holes for an extended wheelbase and a slightly raised hole in the right front so that only three wheels touch the track. (I have found this to be a successful design) This allows you to utilize any version that your required to based on your local rules. All blocks have a hole drilled into the rear of the block that allows you to add my machined lead weight.
(2 slots, 5 axle holes, and weight hole in rear) $10.00
|
 | |
Grooved axles (set of 4) (click picture to enlarge)
$10.00
|
 | |
BSA wheel axles (set of 4) (click picture to enlarge)
These axles are straightened, machined and polished$10.00
|
 | |
Precision BSA wheels (set of 4) (click picture to enlarge)
These wheels are machined and graphite-coated. All points of resistance removed for better speed $15.00
|
 | |
Pinewood Derby Precision Wheel Balancer*
Don't pass up this NEW speed tool for Balancing the wheels of your Pinewood Derby Cars. THE NEW 2009 BSA Wheels are NOT Balanced. For maximum performance and speed, your wheels need to be precision balanced. This specially designed Patented tool can do it. It is very sensitive can detect an unbalanced wheel by identifying the heavy side of the wheel so excess weight can be removed or added. The base of the Pinewood Derby Precision Wheel Balancer* is aluminum and will not rust. Balancing with this tool is a very simple process and is a must for extra speed needed to win your next race. You spend alot of time and effort making the Race car. Now just finish the job with a Balanced set of wheels. You will feel better when you are setting your Fast car with Balanced wheels down on to the track knowing that you went the extra mile before the Race. Thank You *Patented
(see instructions here)
http://www.rlnmachining.com/instructions.htm$23.95
|
